Advertisement
Quick Links
1
HD-5000 Video Stabilizer
(FLCM-HD5-QT)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Camera Platform (Part-1)
Camera Platform (Part-1)
Head Plate(1a)
Table Clamp (Part-7)
Bottom Plate(1c)
Mid Plate (1b)
Accessories
M6 Screws with
V-shape Adapter (Part-5)
Base Platform (Part-3)
(Part-9)
washers (Part-8)
16 x Weight bars (Part-4)
Quick release Adapter (Part-6)
Storage Bag
Central Post (Part-2)
(Part–10)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Related Manuals for Flycam HD-5000
Summary of Contents for Flycam HD-5000
- Page 1 HD-5000 Video Stabilizer (FLCM-HD5-QT) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
-
Page 2: Specifications
- Base Platform Dimensions - Longest: 17.2 x 5 inches - Number of weight plates: 16 pcs - Weight of single weight plate: 143 to 145gm - Flycam weight without weight plates: appx. 1.4 kg UNICO QUICK RELEASE - Material: Polymide 66 - Color: Matt Black - Dimension: 13.5*7.2*2cm... - Page 3 HD-5000 Stabilizer Setup Insert M6 Screw (Part-8) at both side of base platform (Part-3) then insert the wash- er to hold the bolt at one place. Adding Weights & Positioning for Proper Balance Put the weights (Part-4) according to the...
- Page 4 A telescopic Central Post (Part-2) is made by loosening the control located at the base, raising or lowering, a threaded stud is located in the center of Base Platform (Part-3) for attaching Central Post. Securely tighten the adjustment knob on telescoping clamp by rotating it clockwise.
- Page 5 The many slots located on Head Plate (Part-1) and Bottom Plate (Part-1c) allows you to easily adjust X & Y Axis for perfect balance. Place the assembly in line with center of stabilizer post and tighten the side ad- justers, as shown. Further fine tuning will probably be required. ...
-
Page 6: Balancing The Horizontal Axis
& upright, with Central Post in a perfect vertical position. NOTE: If you do not have enough weight on Base Platform the entire Flycam could flip upside down. If this movement starts to happen, be ready to catch the sled before a complete 180° occurs. This type of un- wanted movement requires more weight to be added to the base with additional weight discs. -
Page 7: Balancing The Vertical Axis
NOTE: The stability of Flycam Stabilizer depends on it being slightly bottom heavy. If it is top heavy, it will tilt more. If it is too bottom heavy, it will be sluggish and hard to aim. - Page 8 Holding your Flycam Stabilizer When handling your Flycam HD Stabilizer, one hand holds onto the handle while other is used to gently guide the camera in direction you wish to shoot and frame shot. For normal shooting, hold the handle in middle.
-
Page 9: Maintenance
Storage: Should you need to store your Flycam HD stabilizer for a long period of time, then place the unit upright in a dry or low-to-normal humidity area whenever possible. If you are unable to find this kind of environment then we suggest you store the unit in an airtight plastic bag. - Page 10 Clamp. It helps achieving balance in just seconds and saves your valuable time. YOUR FLYCAM HD-5000 VIDEO STABILIZER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.