Advertisement
Quick Links
1
Redking Video Stabilizer
(FLCM-RK)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Base Platform
Dovetail Quick Release
Counter Weights
Knobs
Tools
Central Post
Storage Bag
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Related Manuals for Flycam Redking
Summary of Contents for Flycam Redking
- Page 1 Redking Video Stabilizer (FLCM-RK) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 Redking Stabilizer Setup Attach Central Post to the Base Platform by means of threaded stud in center. Rotate the Base Platform to properly secure with Central post. Loosen allen bolts at the bottom of Dovetail Camera Platform, align its holes with top of Central Post &...
- Page 3 Adding Weights & Positioning for Proper Balance Continuing the assembly and balance requirements to make your Flycam Redking Video Stabilizer fully functional you will note that the base platform has a provision to mount the balance weights via 2x BH bolts secured with knobs on both sides of the post.
- Page 4 Turn the adjustment knobs with your other hand until you feel no pressure on your operating hand and the sled will be in static balance. Now that your Flycam Redking Camera Stabilizer is setup and assembled properly, you can test and setup the horizontal balance of the system.
- Page 5 Vertical Balancing Dynamic balance is extremely important for precise operation. For each arrangement of camera, monitor position, post length, accessories, etc. there are many possibilities for statically balancing the Steadycam. However, for each arrangement, there is only one combination that also balances the sled dynamically.
- Page 6 Holding Your FLYCAM stabilizer When handling your Redking Video Camera Stabilizer one hand holds onto the handle while the other is used to gently guide the camera in the direction you wish to shoot and frame the shot. For normal shooting, hold the handle in the middle.
- Page 7 Remove top plate of FLYCAM and line up your camera so that its center of gravity is as close to the center of the plate as possible (basically hold the camera in your hand until it feels balanced both left and right as well as forward and back).
-
Page 8: Maintenance
Cleaning Do not use solvents or harsh cleaners of any kind on your Flycam Hand held stabilizer. If the unit becomes dirty, use a damp soft cloth or sponge and a mild detergent to gently clean external parts. - Page 9 YOUR FLYCAM REDKING VIDEO CAMERA STABILIZER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.