Advertisement
Quick Links
1
Arm Brace Support
(FLCM-AB)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Arm brace foam padding with metal arm support.
Metal arm support
Support Pad
elcro Straps
V
Metal arm support cover
Side 1 Elastic Straps with
Side 2 Elastic Straps with Velcro
Velcro
Velcro Strap
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Related Manuals for Flycam FLCM-AB
Summary of Contents for Flycam FLCM-AB
- Page 1 Arm Brace Support (FLCM-AB) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 Tighten the Velcro straps to fit the arm brace to your arm securely. Make sure it is comfortable enough proper blood circulation. Your arm brace is now ready for use. YOUR FLYCAM ARM BRACE SUPPORT ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES)
- Page 3 Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
-
Page 4: What's In The Box
3000 Handheld Stabilizer (FLCM-3000-Q) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Quick Release Adapter Quick... - Page 5 Stabilizer Setup Attach Central Post to the Base Platform by means of threaded stud in center. Rotate the Base Platform to properly secure with Central post. Loosen allen bolts at bottom of Camera Plate, align its holes with top of Central Post & re-tighten them securing the plate to post.
- Page 6 Adding Weights & Positioning for Proper Balance Continuing the assembly and balance requirements to make your Flycam Handheld Video Stabilizer fully functional you will note that the base platform has a provision to mount the balance weights in their cups via a slot found on both sides of the post.
- Page 7 Do not over-tighten this knob as it could cause thread stripping. Balancing your Flycam Stabilizer Before beginning the balancing process check the following: Camera is securely attached to Head Plate ...
- Page 8 & upright, with Central Post in a perfect vertical position. NOTE: If you do not have enough weight on Base Platform the entire Flycam could flip upside down. If this movement starts to happen, be ready to catch the sled before a complete 180° occurs. This type of unwanted movement requires more weight to be added to the base with additional weight discs.
- Page 9 Remove top plate of FLYCAM and line up your camera so that its center of gravity is as close to the center of the plate as possible (basically hold the camera in your hand until it feels balanced both left and right as well as forward and back).
-
Page 10: Maintenance
Hold the handle normally and turn the FLYCAM so that it is horizontal to the ground. Let go of the stalk while keeping a firm grip on the handle and count how long it takes to return to vertical again. You should be able to count a good, "One-one thousand, two-one thousand", before it rights itself. - Page 11 Storage Should you need to store your Flycam Hand held stabilizer for a long period of time then place the unit upright in a dry or low to normal humidity area whenever possible. If you are unable to find this kind of environment then we suggest you store the unit in an airtight plastic container or bag.