Advertisement
Quick Links
1
Flowline Master 180° for Camera & Gimbals
(FLCM-FLN-MSTR-PLA-01)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Tension Spring
Safety Shock Cord
Bag Packing
Flowline Master Body Support
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Flycam Flowline Master 180
Summary of Contents for Flycam Flowline Master 180
- Page 1 Flowline Master 180° for Camera & Gimbals (FLCM-FLN-MSTR-PLA-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
-
Page 2: Table Of Contents
INDEX Sr. No Particulars Page No. Support Bar Assembly Front Extension Section Assembly Support Bar Height Adjustment Camera Mounting Detach the Placid Arm from the Flowline Master Remove Camera Hook from Placid Stabilizing Arm Attach Camera Hook to the Support Bar Flipping Front Extension Section Mounting... - Page 3 Flycam Flowline Master when Placid Arm is attached to the support Bar Flowline Placid Camera Hook Tensioner Spring Safety Shock Cord Support Bar Side Support adjustment Release Lever Balance Knob Adjustment Accessory Bag...
-
Page 4: Support Bar Assembly
Flycam Flowline Master Setup Support Bar Assembly • Join support bar with body support by push-fit technique. NOTE: The placid arm has a cord attached to Front Extension Section Assembly • Remove both the knobs from the Support Bar. •... -
Page 5: Support Bar Height Adjustment
Support Bar Height Adjustment • Loosen all four Adjustment Knobs provided on the back of Support Jacket. • Then, adjust height (Upward/ Downward) of the Support Bar. • Once the support bar is at a desired height re-tighten all four Adjustment Knobs to secure it. - Page 6 Height Adjustable Support Bar Height Adjustable Knobs • Put on the support jacket and tighten the buckles provided at the waist and chest. • Then, adjust the jacket as per your convenience.
-
Page 7: Camera Mounting
NOTE: It is recommended to attach the minimum required weight 4kg / 9lb for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system. • Through the balance adjustment Knob, you can adjust the balance anti-clockwise according to the weight of your setup. -
Page 8: Detach The Placid Arm From The Flowline Master
NOTE: You can balance the setup & adjust the spring tension using the adjustment knob. Detach the Placid Arm from the Flowline Master • Remove the safety shock chord. • Loosen Allen bolt of the Placid Adapter using a 4mm Allen Key. •... -
Page 9: Attach Camera Hook To The Support Bar
• Remove the cord from the cap and pull out from the other side. • remove the cord into the placid adapter from the bottom. Attach Camera Hook to the Support Bar • Now, insert the Cord into the Cap. •... -
Page 10: Flipping Front Extension Section Mounting
Flycam Flowline Master when Placid Arm is not attached to the support Bar Install Flycam Flowline Placid and change the Spring, Follow this https://bit.ly/3Ae0t7a... - Page 11 YOUR FLYCAM FLOWLINE MASTER FOR CAMERA GIMBALS ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer a one-year warranty for our products from the date of purchase. Within this period, we will repair it without charge for labor or parts. The warranty doesn’t cover transportation costs, nor does it cover a product subjected to misuse or accidental damage.
Need help?
Do you have a question about the Flowline Master 180 and is the answer not in the manual?
Questions and answers