Advertisement
Quick Links
Advertisement
Related Manuals for Flycam Flowline Series
Summary of Contents for Flycam Flowline Series
- Page 1 Flowline Placid 2-Axis Stabilizing FLCM-FLN-PLA Arm ( Instruction Manual...
- Page 2 At Flycam, our goal is to ensure 100% Customer Satisfaction in all that we do. We back our sales with a 1 year warranty from the date of purchase and work hard to resolve any problems in the unlikely event one should arise.
- Page 3 On behalf of all the people that work so hard to provide you with the most up-to-date, flexible and cost-efficient production gear, we would like to welcome you into the Flycam family. By purchasing your Flowline Placid 2-Axis Stabilizing Arm, you have just joined a host of designers, engineers, machinists, assembly, customer service and office staff that take great pride in all that they do.
- Page 4 It attaches at the end of the Flycam Flowline top arm and allows you to go from high to low mode and to control the vertical and side to side stabilization simultaneously.
- Page 5 Take the cord bundle out from the cup and pull the whole cord until a cord lock comes out. Separate the cord from cord lock and keep the lock aside for attaching it back afterwards. Separate the cord also from the cup and keep aside for mounting it back later.
- Page 6 Use a tool to unscrew small bolts that hold the front pulley, from each side. Pull out the front pulley carefully, so it doesn’t drop into the Flowline support bar and Insert the cord from the bottom hole and tug it out from the top hole. ...
- Page 7 Again use tools to tighten the bolts from each side and set the pulley at its position. Turn the Placid Arm upside down. By using an allen key, loosen the mounting bracket of Arm. Now the bracket has enough space for the cord to pass through it. ...
- Page 8 Now you can hold the Placid arm in its standard position. The cord is aptly set to perform its function. By using an allen key, tighten the mounting bracket of Placid Arm with Flowline support arm. To fix Placid arm at its appropriate position, attach one side of Safety Elastic Cord to a knob on Placid arm.
- Page 9 Then, drag the other side of elastic cord across Flowline support arm, and attach to the knob on other side of Placid arm. Put-in the cup back through the cord and relock it with the cord lock. Roll the leftover cord inside the cup.
- Page 10 Wear support jacket and tighten the buckles provided at the waist, adjust as per your convenience cup. Tighten the buckles provided at the chest of support jacket, and adjust as per your convenience. By adjusting side support, you will move the weight on your hips, thus resulting in comfortable long hour shooting.
- Page 11 Loosen the knob of hook and attach the camera to it. Tighten with provided knob to ensure slip-free connection. YOUR FLOWLINE PLACID 2-AXIS STABILIZING ARM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES)
- Page 12 WARRANTY We offer a one year warranty for our products from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us.