Download Print this page

Flycam FLCM-FLN-TC Assembly Manual

Flowline camera gimbal tilt control kit

Advertisement

Quick Links

1
Flowline Camera Gimbal Tilt Control Kit
(FLCM-FLN-TC)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flowline Camera Gimbal Tilt
1 x L-Type Allen key
(Size: 3 x 16")
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.

Advertisement

loading

Summary of Contents for Flycam FLCM-FLN-TC

  • Page 1 Flowline Camera Gimbal Tilt Control Kit (FLCM-FLN-TC) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
  • Page 2 Flowline Camera Gimbal Tilt Control Kit Setup NOTE: Flycam Gimbal Tilt Control Kit is exclusively designed for all Flycam Flow- line Series to offer steady gimbal tilt. • Remove the bolt of the Flycam Gimbal Tilt Control Kit using a T-type Allen Key (3x16”)(Not...
  • Page 3 • Remove the cap of the Flycam Gimbal Tilt Kit. NOTE: The Crossbar is affixed to the top of your Flowline Rig with the help of the Quick-Release Camera Hook. Flycam Flowline Arm Setup • Remove attached Camera Hook of the Flycam Flowline Arm...
  • Page 4 After inserting the Cord into the Camera Hook, rotate and properly tighten it. • Mount the cap on the Camera Hook and properly secure it. • Attach both the Spindles of the Flycam Gimbal Tilt Kit with the Star Ring (Not Included).
  • Page 5 You can loosen or tighten the rope of the Flycam Gimbal Tilt to adjust its height. • The height of the Flycam Gimbal Tilt Kit is properly adjusted. NOTE: The kit includes a Crossbar, Ropes, Spindles, and a Quick-Release Camera...
  • Page 6 RS-Ronin Setup • Slide the RS-Ronin (Not Included) onto the Star Ring and secure it in position by tightening its locking knob. NOTE: The Crossbar enables supreme balance and lets you tilt your entire Flowline rig down to 90° on either side, allowing dynamic shots.
  • Page 7 YOUR FLYCAM FLOWLINE CAMERA GIMBAL TILT CONTROL KIT ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.