Page 1
What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. 6 Meter Rope Flycam Flowline Edge Stabilization Arm 2.5mm Allen Key Grub Screw All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Page 2
(Note-Included) attached to the original cord. Flowline Edge Setup • Loosen the knob of the Flycam Flowline Edge and pull it out to unfold the edge arm. Note: Foldable design of Flycam Flowline Edge makes it easy to store as you can stash it anywhere.
Page 3
• You can use a sharp object to insert the cord into the Flowline Edge. Make sure it goes precisely in the center & near the spring, up into the hole of the Flowline Edge. • Pull the cord from the bottom of the edge arm while still holding it upside down.
Page 4
• Attach the Edge arm to the support jacket (Not Included) by simple push-fit technique. • Image showing edge arm properly attached to the jacket (Not Included). Note: Flowline edge is compatible with all Flowline N series and Master jacket. •...
Page 5
• Images showing the Edge System working perfectly with various setups. YOUR FLYCAM FLOWLINE EDGE STABILIZATION ARM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.
Need help?
Do you have a question about the FLCM-EDGE-01 and is the answer not in the manual?
Questions and answers