Advertisement
the power to the receiver of Ceiling Fan 1.
- Now the transmitter should be paired with the receiver of ceiling fan 1. Turn ON/OFF or
change the speed of ceiling fan 1 by the transmitter to check the operation.
Setting DC Ceiling fan 2:
- Turn off both ceiling fans 1 and 2 via the mains supply to the receiver.
- Slide the cover of battery compartment of transmitter to access the DIP switches. This will
be transmitter 2.
- Change the position of the DIP switches in the remote transmitter 2, so that it will be
different to transmitter 1.
- Install the 12VDC battery in the compartment. Please make sure the polarity of the battery
is correct.
- Turn on the power to receiver 2. Keep the power OFF to receiver 1. (Each ceiling fan must
have its own isolation switch, so that only the Ceiling fan that needs to be paired with the
transmitter will be ON).
- Press and hold the SET button of transmitter 2 for 6 seconds within 60 seconds of switching
the power to the receiver of Ceiling Fan 2.
- Now the transmitter should be paired with the receiver of ceiling fan 2. Turn ON/OFF or
change the speed of the ceiling fan 2 by the transmitter to check operation.
Advertisement
