Download Print this page

Faro mini eterfan Manual page 3

Hide thumbs Also See for mini eterfan:

Advertisement

Do not connect the fan directly to the power source. A wall controller is not available for this
fan. Only use the remote control provided with the product. Contact the distributor if you
need to replace the product.
1- Protection class I: The fitting has an earthing connection: The earth wire (yellow / green)
has to be connected to the clip marked with
.
2- This fitting should only be installed in rooms where direct contact with water is
impossible.
3- Reverse function.
4- Consumption in W, according to the speed of the motor.
5- Revolutions per minute.
6- Remote control, included.
7- This device children can use it with age of 8 years or more and people with physial,
sensory or mental small capacities, if they has been given them the supervision or adapted
training. The children must not play with the fans. The cleanliness and the maintenance
must be done by an adult.
WARNINGS
Read entire booklet carefully before beginning installation and save these instructions. To
reduce the risk of personal injury, attach the fan directly to the support structure of the
building according to these instructions, and use only the hardware supplied.
To avoid possible electrical shock, before installing your fan, disconnect the power by
turning off the circuit breakers to the outlet box and associated wall switch location.
For the electrical connection it is necessary to incorporate an isolator switch according to the
installation regulations, which ensures all-pole cut, directly connected to the power
terminals and it must have a contact separation in all its poles, which provides total
disconnection under category III surge conditions.
All wiring and connections must be made in accordance with national and local electrical
codes. If you are not familiar with the way to do the electrical installation, you must use the
services of a qualified electrician.
Make sure that the fan is disconnected from the mains before removing the protection. To
reduce the risk of personal injury, do not bend the blade attachment the system when
installing, balancing or cleaning the fan. Never insert foreign objects between rotating fan
blades.
To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the fan by the
lead wires.
The fan blades cannot be installed lower than 2,3m from the floor.
The important precautions, safeguards and instructions appearing in this manual are not
meant to cover all possible conditions and situations that may occur. It must be understood
that common sense, caution and carefulness are factors which cannot be built into this
product. These factors must be supplied by the person(s) installing, caring for and operating
the unit.

Advertisement

loading

This manual is also suitable for:

EterfanMini tubeTubeJust fan