Other Operations
Switching the audio input
mode
(INPUT MODE)
You can select the audio input mode by setting
the audio input mode when you connect
components to both digital and analog audio
input jacks on the receiver.
1
Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
• AUTO 2 CH
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• COAX FIXED
Specifies the digital audio signals input to
the DIGITAL COAXIAL jack.
• OPT FIXED
Specifies the digital audio signals input to
the DIGITAL OPTICAL jack.
• ANALOG FIXED
Specifies the analog audio signals input to
the AUDIO IN (L/R) jacks.
• HDMI FIXED
Specifies the audio input to the HDMI jacks.
Note
Some audio input modes may not be set up
depending on the input.