Sony STR-DG900 Operating Instructions Manual page 30

Notes on HDMI connections
• The multi/stereo area audio signals of a
Super Audio CD are not output.
• Turn on the receiver when the video and
audio of a playback component are being
output to a TV via the receiver. If the power
supply of the receiver is not turned on,
neither video nor audio is transmitted.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from a HDMI jack
may be restricted by the connected
component. Check the setup of the
connected component if the image is poor or
the sound does not come out of a component
connected via the HDMI cable.
• When the connected component is not
compatible with copyright protection
technology, the image and/or the sound from
the HDMI MONITOR OUT jack may be
distorted or may not be output.
In this case, check the specifications of the
connected component.
• Refer to the operating instructions of each
component connected for details.
• An audio signal input to the HDMI IN jack
is not output from the REC OUT or ZONE 2
jack of this receiver.
• An on screen display is not output from
HDMI MONITOR OUT jack of this
receiver.
30 US