Watching A Dvd - Sony STR-DG900 Operating Instructions Manual

Watching a DVD

?/1
TV RM SET UP AV ?/1
SYSTEM STANDBY
VIDEO 1 VIDEO 2 VIDEO 3 DVD
TV/SAT MD/TAPE SA-CD/CD TUNER
PHONO MULTI CH SOURCE ZONE 2
2CH A.F.D. MOVIE MUSIC
CATEGORY
SLEEP MODE D. TUNING ON SCREEN
1 2 3
>10/
4 5 6
7 8 9
– /– –
0/10
CLEAR ENTER
>10 MEMORY
DISPLAY TOOLS
V
B B
v
AMP
RETURN/
MENU
EXIT
– CATEGORY +
REPLAY ADVANCE
. < < >
TUNING – TUNING +
m H M
DISC SKIP
X x
TV VOL TV CH
MASTER VOL PRESET
MUTING
Notes
• Refer to the operating
instructions supplied with the
TV and DVD player.
• Check the following if you
cannot listen to multi channel
sound.
– Be sure the sound source
corresponds to the multi
channel format (the MULTI
CHANNEL DECODING
lamp on the front panel lights
up during playback).
– Be sure this receiver is
connected to the DVD player
via a digital connection.
– Be sure the digital audio
output of the DVD player is set
up properly.
Tips
• Select the sound format of the
disc to be played, if necessary.
• You can select the sound field to
suit the movie/music. Refer to
page 62 for details.
Recommended sound fields:
Movie: CINEMA ST. EX
Music: LIVE CONCERT
42 US
2
3
?/1
TONE MODE
– TONE +
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
VIDEO 3 IN/PORTABLE AV IN
PHONES
S-VIDEO VIDEO L AUDIO R DIGITAL(OPT)
7
1
Turn on the TV and DVD player.
2
Turn on the receiver.
3
Press DVD.
You can also use INPUT SELECTOR on this receiver to
select DVD.
4
Switch the input of the TV so that an image
of the DVD is displayed.
5
Set up the DVD player.
Refer to "Quick Setup Guide" supplied with the receiver.
6
Playback the disc.
7
Adjust to a suitable volume.
8
After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player.
MULTI CHANNEL DECODING lamp
MULTI CHANNEL DECODING
TUNING MODE
– TUNING +
MEMORY/ CATEGORY
ENTER MODE – CATEGORY + 2CH
MASTER VOLUME
DISPLAY INPUT MODE
INPUT SELECTOR
MULTI CH IN/
A.F.D. MOVIE MUSIC
DIRECT
7
HDMI
3