Select The Channel - Sony STR-DG900 Operating Instructions Manual

3
Press CATEGORY + or
CATEGORY – to select the
category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
4
Press TUNING + or TUNING – to

select the channel.

You can also press TUNING MODE on
the receiver to select "AUTO TUNING",
and then turn TUNING +/– to select the
channel.
Notes
• When you select a channel in the "ONE CAT"
mode, the channel you selected may not be the one
in the category you want. This is because one
channel may belong to more than one category.
• If you press CATEGORY + or CATEGORY – in
the "ALL CAT" mode, the first channel of the next
or previous category is selected (CATEGORY
SKIP).
Selecting channels by inputting
the channel number directly
(DIRECT TUNING)
TV/SAT MD/TAPE SA-CD/CD
PHONO MULTI CH SOURCE
2CH A.F.D.
CATEGORY
SLEEP MODE
1 2
4 5
7 8
– /– –
0/10
CLEAR
>10
1
Press TUNER repeatedly to
select "XM RADIO".
You can also use INPUT SELECTOR on
the receiver.
74
US
TUNER 1
ZONE 2
MOVIE MUSIC
D. TUNING ON SCREEN
2
3
3
6
9
4
ENTER
MEMORY
2
Press D.TUNING.
3
Press the numeric buttons to
enter the channel number.
4
Press ENTER.
You can also use MEMORY/ENTER on
the receiver.
The selected channel is tune in.
Displaying the XM-RADIO
information on the front panel
display
?/1
TONE MODE TUNING MODE
– TONE + – TUNING +
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
MEMORY/ CATEGORY
ENTER MODE – CATEGORY +
VIDEO 3 IN/PORTABLE AV IN
PHONES
S-VIDEO VIDEO L AUDIO R DIGITAL(OPT)
Press DISPLAY on the receiver
repeatedly.
Each time you press DISPLAY while tuning in
the channel, the display changes cyclically as
follows;
Channel name t Channel number t
Category name t Artist name/Feature t
Song/Program title t Sound field type
Tip
The preset number is always displayed at the right
end of the display.
DISPLAY
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE
INPUT SELECTOR
MULTI CH IN/
2CH A.F.D. MOVIE MUSIC DIRECT HDMI