Sony STR-DG900 Operating Instructions Manual page 76

2
Press PRESET + or PRESET –
repeatedly to select the preset
channel you want.
You can also press the numeric buttons to
select the preset channel you want. Then
press ENTER to enter the selection. You
can also press TUNING MODE on the
receiver to select "PRESET TUNING",
and then turn TUNING +/– on the
receiver.
You can select preset channels from 1 to
30.
Note
The preset channel information will be updated
depending on the service provided by the XM
Satellite Radio Inc. that you have subscribed to.
XM Radio messages list
Message Explanation
appears
ANTENNA The XM antenna is not connected
or transmission is not being
received properly.
UPDATING The encryption code is being
updated.
NO SIGNAL The signal is too weak.
LOADING The audio channel or information
is being acquired.
OFF AIR The selected channel is off the air.
–––– There is no characteristic
information such as an artist name,
song title or program title
available.
–– The preset number entered is
invalid number.
XM –––CH The selected channel is not
available.
76
US
Remedies
Make sure that the antenna is securely connected.
Try to disconnect the antenna then reconnect, or
turn off the power then turn back on.
Wait until the encryption code has been updated.
Make sure that the antenna is securely connected.
Adjust the antenna so that the signal is as strong as
possible.
Wait until the audio channel or information has been
acquired.
Make sure that you selected the channel properly.
Try to select another channel.
—
Enter a number from 1 to 30.
—