TVS KING DELUXE Owner's Manual page 55

Gear cable inner replacement
Removal
- Loosen the lock nut (B) and adjuster nut (A) at engine end
- Remove cover handle bar ( C ) by loosening two screws
- Remove the lock clip ( D )
- Remove the handle bar sleeve and take out pulley gear
shift.
- Pull out cable inner gear shift
- Loosen pulley gear shift nut at engine end and take the
pulley out
Gear cable assembly at engine end.
SELF MAINTENANCE PROCEDURE
Gear cable assembly at engine end.
Assembly
- Connect gear cable inner to pulley gear shifter at handle
bar end.
- Insert cable inner through cable outer and adjuster
B
- Take out adjuster gearshift cable from stopper
A
- Loosen pulley nut and take out pulley
- Pull out cable inner and connect to pulley at engine end
through pinch bolts
- Apply oil on inner and route it through outer and holes
provided in the pulley gear shifter and tighten pinch bolts.
53