Table of Contents
Advertisement
-
It must switch off as soon as engine start ie., engine rpm
increases, or else bring the vehicle to authorised dealer or
service centre
CAUTION
Do not run the vehicle if the low engine oil pressure indicator
continues to glow while driving
SPARK PLUG
Cleaning the spark plug
-
Pull out the suppressor cap from the spark plug.
-
Remove the spark plug by using plug spanner provided in
the tool kit.
46
SELF MAINTENANCE PROCEDURE
-
Clean carbon from the electrodes and around the base
with the help of spark plug cleaner.
-
Adjust the gap to the specified limit if incorrect
-
Spark plug should be replaced at every 10000km.
Tool name
Spark plug Gap
Spark plug Type
Spark plug cap
To adjust spark plug gap or replacement approach our
Distributor or Dealer or Authorized service center.
Plug the spark plug hole when the spark plug is removed to
avoid entry of foreign particles inside cylinder
Always use recommended make and type of spark plug.
Changing tyres and wheels
1. Spare wheel removal
Spare wheel is fitted inside the engine compartment LH side.
-
Loosen the spare wheel mounting nuts along with spring
washer using 17 mm tubular spanner. ( 2nos.) ( A , B)
0.8- 0.9 mm
-
Take out the spare wheel.
16 mm plug spanner
:
0.8- 0.9 mm
:
Bosch UR 6 DE
:
Resistive
CAUTION
Hide quick links:
Advertisement
Table of Contents
