- To top up oil loosen filler bolt using 17mm spanner.
- Fill recommended oil and tighten filler bolt with washer.
- Tighten the level plug with washer with out fail.
Differential oil level checking and topping up
Tool name
Ring spanner, Socket spanner
Engine Oil Replacement
- Run the Engine for a few minutes to warm up the oil
- Park the vehicle on level ground
- Allow some time for the oil to settle down.
44
SELF MAINTENANCE PROCEDURE
Engine Oil Replacement
- Place a oil pan under the drain plug and un-screw hex.
- Refit drain plug along with plain washer and tighten it.
- Remove the dip stick and pour the correct quantity of
Tool size
10mm,17mm
- Insert and tighten the dip stick completely.
- Check the oil level.
- Replace engine oil at every 5000 kms.
B
flange nuts (2nos.) and take out the cover oil strainer(B)
recommended oil.
Tool name
Ring spanner
Tool size
10 mm