TVS KING DELUXE Owner's Manual page 49

Spare wheel removal
NOTE
Mount the spare wheel on the bracket properly and tighten
the nuts thoroughly.
Tyre and wheel changing procedure.
Removal
- Apply parking brake
- Loosen the wheel retaining nuts diagonally. (4 nos.)
- Place the jack as shown in the fig. (For removing front
wheel B. rear wheel A.)
- Lift up the vehicle until the wheel clears the ground.
- Remove the retaining nuts and take out the wheel.
SELF MAINTENANCE PROCEDURE
A
B
Jack position rear - A
Assembly
- While assembling the spare wheel tighten the wheel nuts
diagonally.
- Lower the vehicle slowly to the ground then tighten the nuts
fully to the recommended torque.
Ring spanner, Socket spanner
Tyre pressure
Front
Rear
Jack position front - B
Tool name
Un-laden
30 psi
30 psi
Tool size
17mm
Laden
30 psi
34 psi
47