Table of Contents
Advertisement
INSTALLATION
The stove should fit into a standard 16" or 18" open fire place without the removal of the
fire-back (chair brick), provided the same complies to BS 1251:1987.
Some minor adjustment may be required to ensure a good fit. The decorative fire surround
should be manufactured from non-combustible materials only.
Fig 1
Ecoburn Inset Stove Cross Sectional
View, Installed Into A Standard 16" or
18" Chair Brick.
Decorative Fire Surround
(Non Combustible)
Fire cement seal
(See page 12)
Superimposed Hearth
Constructional Hearth
Page 10
Throat Forming Lintel
Insulating
infill
Fire Back
To
BS 1251:1987
Expansion
Joint, Thin
Straw Board
Or
Corrugated
Cardboard
etc.
Aarrow Ecoburn Inset 5
Advertisement
Table of Contents
