Table of Contents
Advertisement
2 Safety Instructions
2.1
Operation
When the product is working,
•
It is strictly forbidden to touch the live parts of the product. Otherwise, an elec-
tric shock may occur.
•
It is strictly prohibited to disassemble any parts of the product. Otherwise, an
electric shock may occur.
•
It is strictly prohibited to touch any hot parts of the product (such as the heat
sink). Otherwise, it may cause burns.
2.2
Electrical Connection
Before electrical connections, please make sure that the product is not damaged.
Otherwise, it may cause danger!
Before electrical connections, please make sure that the product switch and all
switches connected to the product are set to "OFF", and use measuring equipment
to ensure that there is no voltage at the connection. Otherwise, an electric shock
may occur!
PV modules will generate lethal high voltage when exposed to sunlight.
•
Operators must wear proper personal protective equipment during electrical
connections.
•
Before performing an electrical connection, be sure to disconnect the PVS and
use measuring equipment to ensure that cables are voltage-free.
•
Respect the protection requirements and precautions of PV modules.
Danger to life due to a high voltage inside the inverter!
•
Be sure to use special insulation tools during cable connections.
•
Note and observe the warning labels on the product, and perform operations
strictly following the safety instructions.
•
Respect all safety precautions listed in this manual and other pertinent
documents.
4
Operation and Maintenance Guide
Advertisement
Table of Contents
