Subscribe to Our Youtube Channel
Related Manuals for HIKOKI DH 24PX2
Summary of Contents for HIKOKI DH 24PX2
- Page 1 Rotary Hammer DH 24PX2 • DH 26PX2 • DH 28PX2 DH28PX2 Read through carefully and understand these instructions before use. Handling instructions...
-
Page 2: General Power Tool Safety Warnings
Symbols WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use. To reduce the risk of injury, user must read Only for EU countries instruction manual. Do not dispose of electric tools together with Failure to follow the warnings and instructions household waste material! may result in electric shock, fi... -
Page 3: Rotary Hammer Safety Warnings
4) Power tool use and care h) Keep handles and grasping surfaces dry, clean a) Do not force the power tool. Use the correct and free from oil and grease. power tool for your application. Slippery handles and grasping surfaces do not The correct power tool will do the job better and allow for safe handling and control of the tool in safer at the rate for which it was designed. -
Page 4: Optional Accessories (Sold Separately)
OPTIONAL ACCESSORIES (sold separately) Tool Adapters Use on jobs facing upwards ● Drilling holes in concrete or tile Dust cup Dust collector (B) Drill bit ● Drilling holes in concrete or tile Taper shank Cotter Drill bit (Taper shank) adapter ●... -
Page 5: Prior To Operation
APPLICATIONS Rotation and hammering function ○ Drilling anchor holes ○ Drilling holes in concrete ○ Drilling holes in tile Rotation only function ○ Drilling in steel or wood (with optional accessories) ○ Tightening machine screws, wood screws (with optional accessories) Hammering only function Grip ○... -
Page 6: How To Use
○ When turning the rotary hammer on while dust collector (B) is detached from a concrete surface, dust collector (B) will rotate together with the drill bit. Make sure to turn on the switch after pressing the dust cup on the concrete Push button surface. - Page 7 Screw heads or bits will be damaged unless a bit Grip Front cap appropriate for the screw diameter is employed to drive in the screws. (2) Driving in wood screws ○ Prior to driving in wood screws, make pilot holes suitable for them in the wooden board.
- Page 8 9. Make sure to securely hold the tool as shown in mark (Fig. 11). (3) Turn the change lever to Fig. 17 during operation. Then the tool is locked. 7. Using depth gauge (Fig. 14) (1) Loosen the side handle, and insert the depth gauge into the mounting hole on the side handle.
-
Page 9: Maintenance And Inspection
Fig. 22 become damaged and/or wet with oil or water. 4. Inspecting the carbon brushes For your continued safety and electrical shock protection, carbon brush inspection and replacement on this machine should ONLY be performed by a HiKOKI Authorized Service Center. - Page 10 5. Replacing supply cord If the replacement of the supply cord is necessary, it Information concerning airborne noise and vibration has to be done by HiKOKI Authorized Service Center to The measured values were determined according to avoid a safety hazard.
- Page 11 English Nederlands GUARANTEE CERTIFICATE GARANTIEBEWIJS Model No. Modelnummer Serial No. Serienummer Date of Purchase Datum van aankoop Customer Name and Address Naam en adres van de gebruiker Dealer Name and Address Naam en adres van de handelaar (Please stamp dealer name and address) (Stempel a.u.b.
- Page 13 GmbH Siemensring 34, 47877 willich, Germany Tel: +49 2154 49930 Fax: +49 2154 499350 URL: http://www.hikoki-powertools.de Hikoki Power Tools Netherlands B.V. Brabanthaven 11, 3433 PJ Nieuwegein, The Netherlands Tel: +31 30 6084040 Fax: +31 30 6067266 URL: http://www.hikoki-powertools.nl Hikoki Power Tools (U.K.) Ltd.
- Page 16 EN IEC 62841-2-6:2020+A11:2020 EN55014-1:2006+A1:2009+A2:2011 EN55014-2:1997+A1:2001+A2:2008 EN61000-3-2:2014 EN61000-3-3:2013 Representative offi ce in Europe 28. 2. 2023 Hikoki Power Tools Deutschland GmbH Akihisa Yahagi European Standard Manager Siemensring 34, 47877 Willich, Germany 28. 2. 2023 Head offi ce in Japan Koki Holdings Co., Ltd.
Need help?
Do you have a question about the DH 24PX2 and is the answer not in the manual?
Questions and answers