16.13
Adjusting the headlight range
16.14
Diagnostics connector
The light-dark boundary must be exactly on the lower mark-
ing when the motorcycle is ready to be operated with the
rider mounted along with any luggage and a passenger if
applicable.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
Turn adjusting screw
Info
Turn clockwise to increase the headlight range; turn
counterclockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
Screw
V01212-10
is always screwed in far enough.
–
Set the headlight to marking
Guideline
The light-dark boundary must lie exactly on lower mark-
B
ing
when the motorcycle is ready to operate with the
rider mounted along with any luggage and a passenger, if
applicable.
400726-11
Diagnostics connector
H02681-10
ELECTRICAL SYSTEM 16
p. 101)
p. 100)
1
to adjust the headlight range.
1
also secures the headlight. Ensure the screw
B
.
1
is located under the passenger seat.
101