Table of Contents
Advertisement
2 SAFETY ADVICE
2.7
In the interest of your own safety, KTM recommends that you only operate the vehicle while wearing protective
clothing.
2.8
Unless specified otherwise, the ignition must be turned off during all work (models with ignition lock, models
with remote key) or the engine must be at a standstill (models without ignition lock or remote key).
Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered
using the number in parentheses. Example: bearing puller (15112017000)
Unless otherwise noted, normal conditions apply to all tasks and descriptions.
Ambient temperature
Ambient air pressure
Relative air humidity
During assembly, use new parts to replace parts which cannot be reused (e.g. self-locking screws and nuts,
expansion screws, seals, sealing rings, O-rings, pins, and lock washers).
In the case of certain screws, a screw adhesive (e.g. Loctite
tions.
If thread locker (e.g., Precote
After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged
or worn parts.
After completing a repair or service work, check the operating safety of the vehicle.
2.9
If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect the
future of the motorcycle sport, make sure that you use your motorcycle legally, display environmental conscious-
ness, and respect the rights of others.
When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws and
regulations of the respective country.
Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are no
legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized KTM dealer will be glad
to advise you.
2.10
Read this owner's manual carefully and completely before making your first trip. The Owner's Manual contains
useful information and many tips on how to operate, handle, and service your motorcycle. This is the only way to
find out how best to customize the vehicle for your own use and how you can protect yourself from injury.
If you would like to know more about the vehicle or have questions on the material you read, please contact an
authorized KTM dealer.
8
Protective clothing
Warning
Risk of injury Missing or poor protective clothing presents an increased safety risk.
–
Wear appropriate protective clothing such as helmet, boots, gloves as well as trousers and a jacket
with protectors on all rides.
–
Always wear protective clothing that is in good condition and meets the legal regulations.
Work rules
®
) has already been applied to a new part, do not apply any additional thread locker.
Environment
Owner's Manual
Tip
Store the Owner's Manual on your terminal device, for example, so that you can read it whenever you need
to.
20 °C (68 °F)
1,013 mbar (14.69 psi)
60 ± 5 %
®
) is required. Observe the manufacturer's instruc-
Advertisement
Table of Contents
