KTM 890 DUKE GP 2022 Owner's Manual page 114

19 SERVICE WORK ON THE ENGINE
112
–
Remove oil drain plugs
rings, and the oil screens.
V01235-10
–
Remove screws
ring.
–
Pull oil filter
Lock ring plier (51012011000)
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
V01236-10
–
Insert new oil filter
Info
Only insert the oil filter by hand.
–
Oil the O-ring of the oil filter cover. Position oil filter cover
–
Mount and tighten screws
Guideline
Screw, oil filter cover
V01237-10
–
Thoroughly clean magnets
drain plugs.
V01238-10
–
Mount the oil drain plugs
and tighten.
Guideline
Plug, oil screen
–
Fill up with engine oil at the clutch cover.
Engine oil
V01235-10
2
along with the magnets, the O-
3
. Take off oil filter cover
5
out of the oil filter housing.
5
.
3
.
M5
A
and oil screens
2
with magnets and new seal rings,
M20x1.5
2.8 l (3 qt.)
4
with the O-
4
.
6 Nm (4.4 lbf ft)
B
of the oil
20 Nm (14.8 lbf ft)
Engine oil
(SAE 10W/50)
( p. 132)