Connecting An Amplifier With An Analog Input; Connecting An Amplifier Or Recorder With An Optical Digital Input - Onkyo C-773 Instruction Manual

Compact disc player
Table of Contents

Advertisement

*En̲C733̲02.fm Page 9 Wednesday, December 22, 2004 3:07 PM
Connecting the C-733 —Continued
Before Making any Connections
• Always refer to the instructions that came with the
component that you are connecting.
• Do not plug in the power cord until all connec-
tions have been properly made.
• Do not bind audio cables with power cords and
speaker cables. Doing so may adversely affect the
sound quality.
Optical Digital Jacks
The optical digital jacks are fitted with protective
caps. Before connecting a cable, remove the cap and
keep it safely. When you disconnect the cable, put
the cap back in.
Connecting an Amplifier with an
Analog Input
Use the supplied analog audio cable to connect the
C-733's ANALOG OUT L/R jacks to the analog input
jacks on the amplifier, as shown.
To use the
system functions, use the supplied
cable to make an
connection.
ANALOG
ANALOG
OUT
OUT
L
L
L
R
R
R
C-733
Supplied cable
L
R
CD
Note
• The C-733 has two
so you can use either one.
• To use
, you must make an analog audio connec-
tion between the C-733 and the other component.
• Use only dedicated
cables for
• If you use the C-733 with other components from the
Onkyo Separate Collection, refer to the instruction
manuals supplied with the A-933 as well.
DIGITAL
OPTICAL
OUT
REMOTE
REMOTE
CONTROL
COMPACT DISC PLAYER
CONTROL
C-733
Supplied cable
jacks. They're both the same,
connections.
Get other manuals https://www.bkmanuals.com
RCA Audio Connection Color Coding
• Red connectors are used for the right channel, and
white connectors are used for the left channel.
Left (white)
Right (red)
• Push each plug in all the way to make a good con-
nection (loose connections can cause noise or mal-
functions).
Right!
Wrong!
.
Connecting an Amplifier or Recorder
with an Optical Digital Input
If your amplifier or recorder has an optical digital audio
input, you can enjoy digital playback or recording.
Use an optical digital audio cable to connect one of the
C-733's OPTICAL DIGITAL OUT jacks to an optical
digital input jack on the amplifier or recorder, as shown.
DIGITAL
OPTICAL
OUT
ANALOG
OUT
REMOTE
CONTROL
L
L
R
R
Both jacks output the
C-733
same signal
Connect one or the other
L
R
DIGITAL
OPTICAL
OUT
COMPACT DISC PLAYER
C-733
IN
OPTICAL
9

Advertisement

Table of Contents
loading

Table of Contents