Precautions For Use
The operator and/or the responsible authority must carefully read and
completely understand the precautions before use. If you use this instrument
in an unspecified manner, the protection it ensures can be compromised, thus
putting you in danger.
■
This instrument is designed for use:
indoors
in a level 2 pollution environment
at an altitude below 2000 m
at a temperature between 0 °C and 40 °C
with a relative humidity of less than 80 % up to 35 °C
The safety of all systems, including the instrument, is the responsibility of the
■
operator.
■
It can be used for measurements on 600 V CAT III circuits, relative to the
ground/earth.
■
Before each use, check the condition of the insulation on the cables, boxes,
sensors and accessories. Any element on which the insulation is damaged
(even partially) must be taken out of service for repair or disposal.
■
Respect the environmental and storage conditions.
The external power supply must be connected to the instrument and to the
■
network (98 to 264) V
■
The power supply to the instrument is fitted with an automatically resettable
electrical protection after disappearance of the fault.
■
As a safety measure, only use factory supplied parts and accessories.
■
It is advised to use individual safety protection whenever the environmental
situation in which the instrument is used requires protection.
When handling the sensors or test probes, do not place your fingers beyond
■
the physical guard.
■
If the battery housing cover is absent, damaged or incorrectly positioned, the
instrument must not be used other than to adjust the sensors.
6
.
AC
Handscope Harmonic Analyzer Oscilloscope Model OX 5022B