Positioning; Location; Electrical Connection - Kernau KFCF 1004 EW User Manual

NOTE: D1 does not contain the
external handle size..

POSITIONING

Install this appliance at a location where the ambient temperature corresponds to the climate class indicated
on the rating plate of the appliance.
For refrigerating appliances with climate class:
- extended temperate: 'this refrigerating appliance is intended to be used at ambient temperatures ranging
from 10 °C to 32 °C (SN);
- temperate: 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C
to 32 °C (N);
- subtropical: 'this refrigerating appliance is intended to be used at ambient temperatures ranging
from 16 °C to 38 °C (ST);
- tropical: 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 16°C to
43 °C (T);

LOCATION

The appliance should be installed well away from sources of heat such as radators, boilers, direct sunlight
etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the
appliance is positioned below an overhanging wall unit, the minimum distance between the top of the
cabinet and wall unit must be at least 100 mm. Ideally, however, the appliance should not be
positioned below overhanging wall units. Accurate leveling is ensured by one or more adjustable feet at
the base of the cabinet.
NOTE: This refrigerating appliance is not intended to be used as a built-in appliance.
WARNING:
It must be possible to disconnect the appliance from the mains power supply, the plug must therefore be
easily accessible after installation.

ELECTRICAL CONNECTION

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your
domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a
contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a
separate earth in compliance with current rewgulations, consulting a qualified electrician.
The manufacturer declines all responsibility of th eabove safety precautions re not observed.
This appliance complies with the E.E.C. Directives.
H1
W1
C1
C1 C1
EN
H1
D1
31