Installation; Service; Energy Saving - Kernau KFCF 1004 EW User Manual

INSTALLATION

IMPORTANT:
For electrical connection carefully follow the instructions given in this specific paragraphs.
• Unpack the appliance and check if there are damages on it. Do not connect the
appliance if it is damaged. Report possible damages immediately to the palce you
bought it. In that case ratain packing.
• It is advisiable to wait at least 4 hours before connecting the appliance to allow the
oil to flow back in to the compressor.
• adequate air circulation should be around the appliance, lacking this leads to
overheating. To achieve sufficient ventilation follow the instructions relevant to
installation.
• Wherever possible the spacers of the product should be aganist a wall to avoid
touching or catching warm parts (compressoc, con-denser) to prevent possible burn.
• The appliance nust not be located close to radiators or cookers.
• Make sure thet the mains plus is accessible after the installation of the applaince.

SERVICE

• Any electrical work required to do the servicing of the appliance should be carried
out by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Center, and only genuine
spare parts must be used.

ENERGY SAVING

• Do not put hot food in the appliance.
• Do not pack food close together as this prevents air circulating.
• Make sure food do not touch the back of the compartment.
• If electricity goes off, do not open the doors.
• Do not open the door frequently.
• Do not keep the door open for too long time.
• Do not set the thermostat on exceeding cold temperatures.
• All accessories, such as drawers, shelves balconies, should be kept there for lower
energy consumption.
EN 27