Epson SureColor SC-P10070 Network Manual page 41

Items
Port Type
The port Information
Finish button
Back button
Cancel button
The new printer port is created in your computer. To install the printer driver, see "Installing the
Printer Driver" on page 44.
Adding a port for a printer assigned with a static IP address
1. For Windows 8.1/8/7/Vista/Server 2012/Server 2008: Open the Control Panel, and then View
devices and printers (Windows 8.1/8/7/Server 2012), or Printers (Windows Vista/Server
2008). Click Add a printer to start the Add Printer Wizard.
For Windows XP: Click Start and then Printers and Faxes. Under Printer Tasks, click Add a
printer to start the Add Printer Wizard. Click Next.
For Windows Server 2003: Click Start and then Printers and Faxes. Double-click Add Printer
in the Printers folder to start the Add Printer Wizard. Click Next.
2. For Windows 8.1/8/7/Vista/Server 2012/Server 2008: Click Add a local printer. Select the
Create a new port radio button, and then select EpsonNet Print Port from the list. Click
Next.
Explanations
The following items are listed in the pull-down menu, and you can select the port
type you need.
IP Address (Auto): Configure the port automatically. If the IP address of the
printer is acquired automatically and the computer and the printer are in the same
segment, you can select this port type.
IP Address (Manual): Use the printer's IP Address for the port name.
HostName (DNS): Use the printer's host name registered in the DNS server for the
port name.
The following items are displayed:
- Port Name (If the port type is changed, the port name and the host name or IP
address are also changed.)
- Printer Model
- Host Name or IP Address
- Protocol
Register the port information to the system and close the Add EpsonNet Print Port
Wizard.
Go back to the printer list window.
Close the Add EpsonNet Print Port Wizard.
Epson Network Guide
Network Software 41