Grandstream Networks GWN76 Series User Manual page 64

RADIUS Sever Configures RADIUS authentication server address. This field is available only when "WPA Key
Address Mode" is set to "802.1x".
Configures RADIUS Server Listening port. Default is: 1812. This field is available only when "WPA
RADIUS Server Port
Key Mode" is set to "802.1x".
Enter the secret password for client authentication with RADIUS server. This field is available only
RADIUS Server Secret
when "WPA Key Mode" is set to "802.1x".
Check the box to enable settings a secondary RADIUS server. Then you need to specify below
three fields:
• RADIUS Server Address: Enter the secondary RADIUS server address.
Secondary RADIUS
Server • RADIUS Server Port : Enter the secondary RADIUS server port. The default port is 1812 and the
range is 1-65535.
• RADIUS Server Secret: Enter the secret password for client authentication with the secondary
RADIUS server.
RADIUS Accounting Configures the address for the RADIUS accounting server. This field is available only when "WPA
Server Key Mode" is set to "802.1x".
RADIUS Accounting Configures RADIUS accounting server listening port. Default is 1813. This field is available only
Server Port when "WPA Key Mode" is set to "802.1x".
RADIUS Accounting Enter the secret password for client authentication with RADIUS accounting server. This field is
Server Secret available only when "WPA Key Mode" is set to "802.1x".
Check the box to enable settings a secondary RADIUS accounting server. Then you need to
specify below three fields:
• RADIUS Accounting Server Address: Enter the secondary Accounting RADIUS server address.
Secondary RADIUS
Accounting Server • RADIUS Accounting Server Port: Configures the secondary RADIUS accounting server
listening port. Default is 1813.
• RADIUS Accounting Server Secret: Enter the secret password for client authentication with the
secondary RADIUS accounting server
RADIUS NAS ID Enter the RADIUS NAS ID. This field is available only when "WPA Key Mode" is set to "802.1x".
Check to activate Hotspot2.0 in the SSID. This field is available only when "WPA Key Mode" is set to
Enable Hotspot2.0
"802.1x". Refer to
Select the Hotspot2.0 profile to use in the SSID. This field is available only when "WPA Key Mode"
Hotspot2.0 Profile
is set to "802.1x". Refer to
Enable Captive Portal Click on the checkbox to enable the captive portal feature.
Choose Blacklist/Whitelist to specify MAC addresses to be excluded /included from connecting to
Use MAC Filtering
the zone's Wi-Fi. Default is Disabled.
Enable Dynamic When enabled, clients will be assigned IP address from corresponding VLAN configured on the
VLAN (beta) RADIUS user profile. This field is available only when "WPA Key Mode" is set to "802.1x".
Client isolation feature blocks any TCP/IP connection between connected clients to GWN76XX's
Wi-Fi access point. Client isolation can be helpful to increase security for Guest networks/Public
Wi-Fi. Three modes are available:
• Radio: Wireless clients can access to the internet services, GWN7xxx router and the access
points GWN76XX but they cannot communicate with each other.
Client Isolation
• Internet: Wireless clients will be allowed to access only the internet services and they cannot
access any of the management services, either on the router nor the access points GWN76XX.
• Gateway MAC: Wireless client scan only communicate with the gateway, the communication
between clients is blocked and they cannot access any of the management services on the
GWN76XX access points.
Advanced
[Hotspot 2.0] for more details
[Hotspot 2.0] for more details