Grandstream Networks GWN76 Series User Manual page 58

Status
The Status page lists all the access points assigned to the selected network, along with the possibility to perform some basic
operations such locating the device (LEDs start blinking in White) or clear the usage data, also users can check more detailed
information about each access point and benefit from useful debugging tools which can help diagnose issue when they
appear.
To get more detailed information about the status of a specific access point, users can click on the desired AP then a page
similar to the following will show up:
The first tab "Info" shows general information about the access point such as the firmware version, IP address, Uptime etc.
While the second Tab "Current Client" displays the clients connected to this AP and The last Tab is used by administrator for
debugging purposes and provides the following tools:
Ping/Traceroute tools, such as the ping utility, traceroute tool.
One Key Debugging, to capture Wireless, Portal or Mesh traffic and logs will be found in Core Files.
Core Files, when a crash event happens on the unit, it will automatically generate a coredump file that can used by
engineering team for debugging purposes.
Configuration
The configuration page allows the administrator to Upgrade, Reboot, Add to SSIDs, Configure, Transfer network group,
Transfer AP, Discover AP, Failover.
Access Points – Status
AP Info
Debug Tool Tab