Transfer Ap - Transfer Network Group - Grandstream Networks GWN76 Series User Manual

To Pair a GWN76XX access point connected to the same Network as the GWN76xx follows the below steps:
1. Connect to the GWN76xx Web GUI as Master and go to Access Points → Configuration.
2. Click on
3. Click on Pair under Actions, to pair the discovered access point as slave with the GWN76xx acting as Master.
The paired GWN76XX access point will appear Online, users can click on
If a GWN76XX is not being discovered or the pair icon is grey color, make sure that it is not being paired with another
GWN76XX Access Point acting as Master Controller. If yes, users will need to unpair it first, or reset it to factory default settings
in order to make it available for pairing by other GWN76XX Access Point Controller
AP Location
GWN76xx supports a handy feature which allows users to locate other Access points by blinking LED. To use the feature,
navigate on the master web GUI under "Access Points → Status" page and click on the icon
corresponding unit will start blinking the LEDs.
Transfer AP – Transfer Network Group
Users can easily transfer the AP from the local master to the GWN Cloud or GWN Manager account by clicking on
When you already have Network/Wi-Fi configurations on your GWN account, using this feature will let you
choose existing Network/SSID to adopt your local AP.
Discover and Pair GWN76XX
to discover access points within GWN76xx Network, the following page will appear.
Discovered Devices
GWN76XX Online
to unpair it.
near the desired AP, and it