Grandstream Networks GWN76 Series User Manual page 91

4. If a slave is offline, it will not be migrated to TR-069. After it goes online again, it will not be migrated to the TR-069
platform either. It is still in the state of being taken over by the original Master, but is no longer managed by the Master. It
cannot be managed by Cloud, but can only be taken over by other Masters or factory reset.
5. APs managed by TR-069 can be "Take Over" by Local Master. After Taken Over, TR-069 shuts down by itself, and the Local
Master issues the configuration to the AP to overwrite the original configuration from TR-069. This process will take a certain
amount of time.
6. An AP under TR-069 will be disconnected from TR-069 by itself after the TR-069 function is turned off on the AP's local web
UI, but it will not affect its function use and can continue to be taken over by Master/GWN Cloud.
SYSTEM
Settings
Users can access Maintenance page from GWN76XX WebGUI��System �� Settings.
LEDs
GWN76XX Access Points series also support the LED schedule feature. This feature is used to set the timing when the LEDs are
ON and when they will go OFF at customer's convenience.
This can be useful for example when the LEDs become disturbing during some periods of the day, this way with the LED
scheduler, you can set the timing so that the LEDs are off at night after specific hours and maintain the Wi-Fi service for other
clients without shutting down the AP.
Following options are available:
Field Description
LEDs Always Off Configure whether to disable the AP LED dictator
LEDs Always On Configure whether to enable the AP LED dictator
Schedule Please choose a schedule to assign to LEDs, users can configure schedules under the menu
Following example on the next page sets the LEDs to be turned on from 8am till 8pm every day.
Basic
Basic page allows Country and Time configuration.
Field
LED VLAN VLAN ID
Allow DHCP Option 43
to Override
Management VLAN
LED Scheduling Sample
Description
This feature is an enhancement in regards of optimizing and reducing energy consumption of
the AP. User can select to either Always on / Always off or to Schedule the period where the
LEDs can remain on Management VLAN: This feature allows GWN AP to be
discovered/managed on VLAN network. If enable, AP will get ip from this vlan. Enter VLAN ID
Configures AP to get provisioned for management VLAN from DHCP Option 43 in the local
server automatically. The default management VLAN will be overridden by the provisioned
settings. Note: Once enabled, users cannot manually change the management VLAN.
LEDs