Connect To Gwn7600 Default Wifi Network; Accessing The Configuration Interface - Grandstream Networks GWN7600 Quick Installation Manual

CONNECT TO GWN7600 DEFAULT WIFI NETWORK

GWN7600 can be used as standalone access point out of
box, or after factory reset
After powering the GWN7600 and connecting it to the network,
GWN7600 will broadcast a default SSID based on its MAC ad-
dress GWN[MAC's last 6 digits] and a random password.
Note: GWN7600's default SSID and password information are printed
on the MAC tag of the unit.

ACCESSING THE CONFIGURATION INTERFACE

A computer connected to the GWN7600's SSID, or to the
same network as the GWN7600
its configuration interface using
Method 1: Discover GWN7600 using its MAC Address.
1. Locate the MAC address on the MAC tag of the unit, which is on the
underside of the device, or on the package.
2. From a computer connected to same network as the GWN7600, type
in the following address using the GWN7600's MAC address on your
browser https://gwn_<mac>.local
Example: if a GWN7600 has the MAC address 00:0B:82:8B:4E:28,
this unit can be accessed by typing https://gwn_000b828b4e28.local
on the browser.
with Wi-Fi enabled by default.
can discover and access
one of the below methods:
~5~
Method 2: Discover GWN7600 using GWN DiscoveryTool.
1. Download and install GWN DiscoveryTool from the following link:
http://www.grandstream.com/support/tools
2. Open the GWN DiscoveryTool, and click on Scan.
3. The tool will discover all GWN7600 Access Points connected on the
network showing their MAC and IP addresses.
4. Click on Manage Device to be redirected directly to the GWN7600's
configuration interface, or type in manually the displayed IP address on
your browser.
Enter username and password to login. (The default administrator user-
name is "admin" and the default random password can be found at the
sticker on the GWN7600).
Notes :
● Make sure that the GWN7600 is not already paired with another
GWN76xx Access Point as slave, GWN7000 Router Series or
GWN.Cloud, otherwise the configuration interface cannot be ac-
cessed
● If the GWN7600 is already paired, make sure to unpair it first, or
do a factory reset.
● It is customer's responsibility to ensure compliance with local reg-
ulations for frequency bands, transmit power and others.
● To manage GWN7600 over cloud, please refer to
gwn.cloud.
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
https://www.
~6~