Touch Pad - Toshiba PORTEGE R300 Maintenance Manual

4.10 Touch pad

4.10 Touch pad
Removing the Touch pad
To remove the touch pad, follow the steps below and refer to Figure 4-14.
1. Remove the touch pad fixed with the double-sided tape on the cover FAT assembly.
2. Turn the touch pad and disconnect touch pad cable from the touch pad assembly.
Touch pad
Installing the Touch pad
To install the touch pad, follow the steps below and refer to Figure 4-14 and Figure 4-15.
1. Connect the touch pad cable to the connector on the touch pad.
2. Stick a new double-sided tape touch pad and install the touch pad in place.
Guide
CAUTION: Do not reuse the removed double-sided tape.
PORTÉGÉ R300 Maintenance Manual (960-591)
All manuals and user guides at all-guides.com
Connector
Figure 4-14 Removing the touch pad
Figure 4-15 Installing the touch pad
4 Replacement Procedures
Touch pad cable
[CONFIDENTIAL] 4-23