Toshiba PORTEGE R300 Maintenance Manual page 103

2.15 CD card Slot Troubleshooting
This section describes how to determine if the computer's CF card functions are functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1: Check on Windows XP
Procedure 2: Connector Check and Replacement Check
Procedure 1 Check on Windows XP
Insert a CF card into the slot. Check if the installed Windows recognizes automatically the
CF card and the data in the CF card can be read.
If the card is not recognized or data are not red, go to Procedure 2.
Procedure 2 Connector Check and Replacement Check
The CF card is connected to IS2140 on the CF card board.
Check 1 The CF card, CF card board and system board may be disconnected. Make sure
the CF card is firmly inserted to IS2140 on the CF card board and the CF FPC is
firmly connected to the connector CN2160 on the CF card board and the
connector CN2150 on the system board.
If not, insert them firmly. If the CF card is still not functioning properly, perform Check 2.
Check 2 The CF card may be faulty. Replace it with a new one following the step in
Chapter 4 Replacement Procedures. If the problem continues, perform Check 3.
PORTEGE R300 Maintenance Manual (960-591)
All manuals and user guides at all-guides.com
2 Troubleshooting Procedures
[CONFIDENTIAL] 2-61