Table of Contents
Advertisement
Section 3 - Configuration
If you click Edit or Add Rule, the following options will appear:
Name
Enter a name for the rule.
Local IP
Enter the IP address of the computer on your local network to
which you want to direct the incoming service. Alternatively,
select the device from the drop-down menu.
TCP Port
Enter the TCP ports that you want to open. You can enter a
single port or a range of ports. Separate ports with a comma
(for example: 24,1009,3000-4000).
UDP Port
Enter the UDP ports that you want to open. You can enter a
single port or a range of ports. Separate ports with a comma
(for example: 24,1009,3000-4000).
Schedule
Use the drop-down menu to select the time schedule during
which the rule will be active. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Management > Time & Schedule
- Schedule on page 77 for more information.
D-Link G403 User Manual
69
Advertisement
Table of Contents
