Page 2
Connecting the DWL-810 Ethernet-to-Wireless Bridge to your Ethernet-enabled device If you are wirelessly connecting the DWL-810 to an Access Point or Wireless Router on a larger wireless network, additional configuration is required (see Step 3.) A. First, connect the power adapter to the receptor at the back panel of the DWL-810 and then plug the other end of the power adapter to a wall outlet or power strip.
Page 3
How the DWL-810 Ethernet-to-Wireless Bridge Connects to other Wireless Devices When you have completed the steps in this Quick Installation Guide, and you have connected the DWL-810 to your host computer, set top box, or gaming console, you will be able to wirelessly connect to other 802.11b wireless devices to share files, join multiplayer video games or even share your internet connection over the wireless network (Setup #2.)
Page 4
Setup #2 Wireless Router If you are connecting in Setup #2 mode (as shown above), please continue to Step 3 in this guide. If you are connecting in Setup #1 mode, no further configuration is needed! You are ready to enjoy your connection with the DWL-810 right now!
Page 5
Web-based Configuration If you need to configure the DWL-810, follow the steps below: Before You Begin the Configuration It’s best to use a computer (with an Ethernet adapter) that is connected directly to the DWL-810 for configuration. The default IP address for the DWL-810 is 192.168.0.30 with a Subnet Mask of 255.255.255.0.
Page 6
To assign a Static IP Address to the laptop or computer that you are using to configure the DWL-810, please do the following: (The following illustrations show Windows XP with the D-Link DWL-650+ Wireless Cardbus Adapter. Other operating systems and other wireless network adapters will have similar procedures for assigning a Static IP Address.)
Page 7
Go to Start > Double- click on Control Panel > Double-click on Network Connections > Right-click on Local Area Connections > Click Properties Highlight Internet Protocol (TCP/IP) D-Link DWL-650+ Click Properties Select Use the following IP address in the Internet...
Page 8
Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.
Need help?
Do you have a question about the Air DWL-810 and is the answer not in the manual?
Questions and answers