Table of Contents
Advertisement
Section 2 - Installation
Go to Settings > Cellular to configure your cellular connection. You can view data on the LTE modem connected
to the router and enable/disable the function for automatic creation of 3G/LTE WAN connection.
Service Mode:
Select 2G Only, 3G Only, LTE Only, or Auto
to let the system determine.
Connection
Select Auto Connect or Manual Conect.
Mode:
Data Roaming:
Enable or disable Data Roaming.
APN Mode:
Select Manual or Auto for APN mode.
APN Name:
When APN Mode is set to manual, enter the
name of your APN.
PDP Type:
Select IPv4, IPv6, or IPv4/IPv6 for PDP type.
Username:
Enter your username.
Password:
Enter your password
Dial Number:
Enter the dial number
Authentication
Select PAP, CHAP, NONE, or Auto for your
Type:
authentication type.
D-Link G403 User Manual
Connection Settings
Dial-up Settings
Cellular
28
Advertisement
Table of Contents
