A. First, connect the power adapter to the receptor at the back panel of the DWL-810 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
Connecting the DWL-810 in Infrastructure Mode No configuration of the DWL-810 is needed if your setup is similar to Setup #1. Connect a cross-over cable from the DWL-810 to your Ethernet enabled: Desktop PC, Laptop PC, Set-Top-Box, or Gaming Console.
Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP address within the same range as the DWL-810’s IP address in order to configure the DWL-810. See the Appendix in this Quick Installation Guide if you need assistance in assigning a Static IP address.
Channel settings to match an existing Ad-Hoc wireless network. Click Apply Changes will not take effect until you reboot the DWL-810. To reboot, click on Admin at the top of this screen. In the Admin window, click reboot to save the changes.
You have completed the Configuration of the DWL-810! Appendix Assigning a Static IP Address in Windows To assign a Static IP Address to the laptop or computer that you are using to configure the DWL-810, please do the following: Note: The following screens are taken using Windows XP.
Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.