Table of Contents
Advertisement
2. Set Log Storage Mode.
System
Default
Custom
3. Click Apply.
13.7.2 Search & Export Log Files
The device operation, alarm, exception, and information can be stored in log files, which can be
viewed and exported at any time.
Steps
1. Go to Maintenance → Log Information .
2. Set the log search conditions, including the time, major type and minor type.
3. Click Search to start searching the log files.
4. The matched log files will be displayed on the list, as shown below.
Network Video Recorder User Manual
Figure 13-13 Log Storage
Each disk will allocate a certain space to store about 400,000 logs. When logs
are full, old logs will be overwritten.
You can set Log Storage Period and allocate Log Disk for log storage. When
the log disk is full, logs that exceed the period will be overwritten.
Figure 13-14 Log Search Interface
Figure 13-15 Log Search Results
156
Advertisement
Table of Contents
