Information On The Device; Intended Use - Fronius Smart Meter TS 65A-3 Operating Instructions Manual

Information on
Technical data, markings and safety symbols are located on the Fronius Smart
the device Meter TS. These must NOT be removed or painted over. They warn against incor-
rect operation which can lead to serious injury and damage.
Markings:
Safety symbols:

Intended use

The Fronius Smart Meter TS is a fixed piece of equipment for public grids of
TN/TT systems and records self-consumption and/or individual loads in the sys-
tem. The Fronius Smart Meter TS is required for systems with a battery storage
12
The devices comply with all the requisite and relevant standards and
guidelines that form part of the relevant EU Directive, and are therefore
permitted to display the CE mark.
Insulated (protection class II)
Regulatory Compliance Mark (RCM)
Complies with all applicable regulatory requirements in Australia and
New Zealand regarding safety and electromagnetic compatibility, as
well as specific requirements for radio equipment.
To comply with European Directive 2012/19/EU on Waste Electrical and
Electronic Equipment and its implementation as national law, electrical
equipment that has reached the end of its life must be collected separ-
ately and returned to an approved recycling facility. Any device that you
no longer require must be returned to your distributor or disposed of at
an approved collection and recycling facility in your area. Ignoring this
European Directive may have potentially adverse effects on the environ-
ment and your health!
RoHS (Restriction of Hazardous Substances)
The limited use of certain hazardous substances in electrical and elec-
tronic equipment has been complied with in accordance with EU Direct-
ive 2011/65/EU.
Danger of serious injury and property damage due to incorrect opera-
tion.
Dangerous electrical voltage.