Fronius Smart Meter IP
Device descrip-
The Fronius Smart Meter IP is a bidirectional electricity meter which optimises
tion
self-consumption and records the household's load curve. In conjunction with
the Fronius inverter, Fronius Datamanager and Fronius data interface, the Froni-
us Smart Meter IP provides a clear overview of a user's own power consumption.
The meter measures the power flow to the loads or to the grid and forwards the
information via the Modbus RTU/RS485- or TCP (LAN/WLAN) communication to
the Fronius inverter and the Fronius Datamanager.
Observe and follow safety instructions!
Failure to observe the safety instructions will result in damage to personnel and
equipment.
▶
▶
Information on
Technical data, markings and safety symbols are located on the Fronius Smart
the device
Meter IP. These must NOT be removed or painted over. They warn against incor-
rect operation which can lead to serious injury and damage.
Symbols on the rating plate:
Intended use
The Fronius Smart Meter IP is a fixed piece of equipment for public grids of
TN/TT systems and records self-consumption and/or individual loads in the sys-
CAUTION!
Switch off the power supply before establishing a mains connection.
Observe the safety instructions.
CE mark – confirms compliance with applicable EU directives and
regulations. The product has been tested by a specific notified body.
WEEE mark – waste electrical and electronic equipment must be
collected separately and recycled in an environmentally sound
manner in accordance with the European Directive and national law.
UKCA mark – confirms compliance with applicable UK directives and
regulations.
RCM mark – tested in accordance with the requirements of Australia
and New Zealand.
11