Vci; Technical Specifications - Launch X-431 PAD V ELITE User Manual

Table of Contents

LAUNCH

1.3.2 VCI

The SmartLink C device features powerful functions and it can be applied in the following situations:

1). When as a VCI (Vehicle Communication Interface), it needs to work in conjunction with the Diagnose module of the

tablet, which is used to obtain vehicle data, and then send it to the tablet for analysis via Bluetooth / data cable.

2). When as a SmartLink C (Customer) dongle, it does not communicate with the tablet, but it needs to work together

with the SmartLink module of the tablet. The tablet is mainly used to issue remote diagnostic requests, and the

SmartLink C dongle is networked to receive and execute commands from the remote SmartLink B (Business).

Note: For detailed operations, please refer to Chapter 5.3.

3). When as a local or remote J2534 PassThru device, it can be used in conjunction with the PC installed with OEM

diagnostic software.

Note: For detailed operations, please refer to Chapter 12.

1. Touch screen

2. LAN/WAN port

Connect the SmartLink C device to the Internet via the crossover cable. It only applies to the SmartLink Super Remote

Diagnostics.

3. OBD-16 diagnostic connector

Connect the SmartLink C device to the vehicle's DLC (Data Link Connector) port via the OBD II extension cable.

4. DC-IN power jack

Currently disabled and for manufacturer use only.

Warning: The SmartLink C device obtains power through the vehicle's DLC, and it is prohibited to connect to an external DC

power supply. No responsibility can be assumed for any damage or loss caused as a result of not strictly following the above

method.

5. Data I/O port

• Connect the SmartLink C device to the tablet to perform vehicle diagnosis.

• Connect the SmartLink C device to the PC when as a J2534 PassThru device.

1. Display tablet

CPU: 8-core Processor, 2.0GHz

Display: 10.1 inch touch screen with a resolution of 1920 x 1200

X-431 PAD V ELITE User Manual

Table of Contents