System Scan; System Selection - Launch X-431 PAD V ELITE User Manual

LAUNCH
Note: Clearing DTCs does not fix the problem(s) that caused the code(s) to be set. If proper repairs to correct the problem that
caused the code(s) to be set are not made, the code(s) will appear again and the check engine light will illuminate as soon as the
problem that cause the DTC to set manifests itself.

5.2.2 System scan

This option allows you to quickly scan which systems are installed on the vehicle.
On the test item selection screen, tap System Scan, the system start scanning the systems. Once the scanning
process is complete, the following screen will appear.
Tap the desired system to go to the diagnostic function selection screen. For detailed operations on diagnostic function,
please refer to Chapter 5.2.3.

5.2.3 System selection

This option allows you to manually select the test system and function step by step.
On the test item selection screen, tap System Selection, the screen displays as follows:
Swipe the screen from the bottom to view the vehicle system on the next page.
Tap the target system (take ECM for example) to navigate to the diagnostic function selection screen.
Note: Different vehicle has different diagnostic menus.
A. Version Information
20
X-431 PAD V ELITE User Manual