Disassembly
Removing and Replacing the RTC Battery
G
26
1.
Remove the battery cover, battery, SIM, antenna cover, rear housing, and
transceiver board as described in the procedures
2.
Use the flat end of the disassembly tool to pry the real time clock (RTC) battery
from its socket on the transceiver board. See Figure 12.
Dispose of used batteries according to the manufacturer's instructions.
Figure 12. Removing the RTC Battery
3.
To replace, align the new RTC battery with its socket so its positive terminal
is facing upward, then snap the battery in place until it is completely seated
in the socket.
4.
Replace the transceiver board, rear housing, antenna cover, SIM, battery, and
battery cover as described in the procedures.
October 14, 2002
TRANSCEIVER BOARD
RTC BATTERY
Product Family C25
.
020586-o
6881041B25