General Technical Information; Remote Control And Range; Receiver And Temperatures; Battery Replacements - RAIS Visio 70 F User Manual

Hide thumbs Also See for Visio 70 F:
Table of Contents

Advertisement

GENERAL TECHNICAL INFORMATION

Be aware of the following general technical information regarding
the remote control and receiver unit.

REMOTE CONTROL AND RANGE

The remote control has a maximum range of 10 metres from the
receiver. Placing the remote further from the receiver can interfere
with the connection and may cause the need of a reset.

RECEIVER AND TEMPERATURES

The receiver will shut down if the heat exceeds the following
temperatures:
Receiver without internal batteries: 32°F to 176°F (CSA)
Receiver with internal batteries: 32°F to 131°F (CSA)
Receiver without internal batteries: 0°C to 80°C (CE, AGA)
Receiver with internal batteries: 0°C to 55°C (CE, AGA)

BATTERY REPLACEMENTS

It is recommended that you replace the batteries when using the
fireplace for the first time in the year.
Old or flat batteries should be removed immediately. If old/flat
batteries are left in the device they can overheat, leak and/or
explode.
NEVER expose batteries (this includes when they are kept in storage)
to direct sunlight, strong heat, fire, humidity or violent impacts. All
of these conditions can cause the batteries to overheat, leak and/
or explode.
Batteries must be stored in a location within the recommended
temperature range. Temperature range batteries must be stored at
0-55°C (32-131°F).
Avoid using old and new batteries at the same time. Avoid using
batteries from different manufacturers at the same time.
Low battery in the remote control is indicated by a battery icon.
Frequent beeps from the receiver when the motor operates indicates
low batteries.
A power adapter connected to the socket can be used instead of
batteries. The module for controlling the light/dimmer includes a
power socket.
6
INTRODUCTION

Advertisement

Table of Contents
loading

Table of Contents