Setup Mode - LifeFitness LIFECYCLE GX Service Manual

Setup Mode

The Console must be setup and calibrated prior to use. Follow the step-by-step instructions on each screen. Each screen
has directions to help navigate through the menus.
To enter SETUP MODE, press and hold the OK and Logo buttons simultaneously for 3 seconds.
Use UP and DOWN arrows to
select a language. Press OK to
confi rm selection.
Users can view the software version, enter calibration mode, or exit the setup
while in the Confi guration Screen.
SHOW VERSION
Shows the current software version installed on the console.
CALIBRATION
Starts the brake calibration process. See next page for proper procedure.
EXIT SETUP
Exit setup mode.
SETUP MODE
EMERGENCY STOP
CALIBRATION NEEDED
8
Use UP and DOWN arrows to
select a unit of weight (lbs or
kg). Press OK to confi rm selec-
tion.
Use UP and DOWN arrows to
select a unit of distance (miles
or km) and Speed (mph or
km/h). Press OK to confi rm
selection.