Download Print this page

Sachtler S2080-0013 User Manual

Aktiv bowl connector 100 mm

Advertisement

Quick Links

User Guide
aktiv bowl connector 100 mm
Part No. S2080-0013
www.sachtler.com
EN

Advertisement

loading

Summary of Contents for Sachtler S2080-0013

  • Page 1 User Guide aktiv bowl connector 100 mm Part No. S2080-0013 www.sachtler.com...
  • Page 2: Health And Safety

    All personnel must be fully trained and can be found on the aktiv fluid head manuals adhere to correct manual handling techniques or www.sachtler.com and Health & Safety regulations. It is the responsibility of the local organisation to enforce Important information on the safe installation and safe working practices at all times.
  • Page 3 Pull the Connector Stud from the Adjustment Knob as shown. Scan the QR Code to see installation video or type into browser: sachtler.com/aktiv-head-installation Fitting 100 mm Bowl Connector For The 1st Time Note! Fitting and adjusting the Bowl...
  • Page 4 1st Time Installation 3. Align the flats on the thread of the Install Bowl Connector to Tripod Connector Stud with the flat on the 1. Offer the Connector Stud to the tripod Adjustment Knob. See diagram on the from above. left for the visual flat markers on the Adjustment Knob and Connector Stud.
  • Page 5 1st Time Installation Mounting the Head and Setting 3. Lower the head onto the Bowl Connector Tension Connector and release the SpeedLevel Lever. 1. Apply the horizontal and vertical brakes and hold the head firmly with one hand. 2. Lift the SpeedLevel Lever as shown all the way to the top.
  • Page 6 1st Time Installation 6. Gently, finger tighten the Bowl 4. To set the connector tension, raise the Connector by pressing up the outer ring tripod so the head is at eye level. and turning clockwise to remove the 5. Lift the SpeedLevel Lever on the head clearance.
  • Page 7 1st Time Installation 7. The tension is correct when the CAUTION! Push the SpeedLevel SpeedLevel Lever is released and sits Lever fully closed against the between approximately 60° and 45° (30 head body before use. mm to 50 mm (1” - 2”)) from the body of the head as shown in the diagram below.
  • Page 8 Publication No. S2080-4991/1 www.sachtler.com...

This manual is also suitable for:

S2080-0002