Xtreme Power Conversion P80g User & Installation Manual page 37

All manuals and user guides at all-guides.com
P80g User's Manual Uninterruptible Power Supply
Step 5: Once battery box is opened, remove the battery hold down brackets present on the left side of the battery
box by unscrewing the 2 screws on each bracket.
Note: To install the second branch of batteries, repeat the same procedure on the battery fixing plate on the right
side of battery box.
Step 6: Now, it is possible to put the batteries inside following below picture (in the following drawing are indicated
the fasten positions for the correct batteries placing).
Note: To install the second string of batteries, repeat the same procedure on the right side of battery box.
Step 7: Connect all batteries following the wiring diagram shown in next chapter.
Step 8: Put all batteries inside and secure in place with the hold down brackets.
Note: To install the second string of batteries, repeat the same procedure on the right side of battery box.
Xtreme Power Conversion Corporation Page 37